Stainless Steel Fabrication

  • One of the United Kingdoms stainless steel fabrication specialists.
  • Custom & bespoke manufacturing of stainless steel items for industry and the catering trade.
  • High quality laser cut parts made to order.
  • CAD & CAM design facilities

Experts in commercial kitchen layout and commercial ventilation canopies.  Together with all the necessary catering equipment and fabrication that you may need.

  • Stainless Steel Wall Tables
  • Stainless Steel Centre Benches
  • Stainless Steel Sinks
  • Stainless Steel Wash Hand Basins
  • Stainless Steel Heated Gantries
  • Stainless Steel Wall Cladding and Sheets
Sort By:

Commercial Catering Sink 600mm Width 1200mm Length

Our Sinks Are Made With Stainless Steel 304 1.5mm On The Top &1.2mm Stainless Steel 430 For The ..


Commercial Catering Sink 650 Width 1200mm Length

Our Sinks Are Made With Stainless Steel 304 1.5mm On The Top &1.2mm Stainless Steel 430 For The ..


Commercial Catering Wall Table 700mm Width

Materials1.2mm Stainless Steel Grade 304 S15 - Top1.2mm Stainless Steel Grade 430 - Shelf and LegsWi..


Grease Trap Stainless Steel

Grease Trap Stainless SteelMade from quality stainless steelHeat resistant and very durable to acids..


Kitchen Wall Shelf New Product

Kitchen Wall Shelf

Kitchen Wall ShelvesOur new and improved stainless steel kitchen shelves are manufactured in the..


Kitchen Wall Shelf 2PK - Stainless Steel Shelves New Product

Kitchen Wall Shelf 2PK - Stainless Steel Shelves

Kitchen Wall Shelf 2 Pk for commercial kitchensOur new and improved Twin pack stainless steel ki..


Stainless Steel Kitchen Kitchen Splashback

Stainless Steel Splashbacks For KitchensMade from quality stainless steel looks great and is very du..


Stainless Steel Kitchen Splashback

Stainless steel sheetresistant to heat and protects wall finishes ..


Stainless Steel Kitchen Table

Materials1.2mm Stainless Steel Grade 304 S15 - Top1.2mm Stainless Steel Grade 430 - Shelf and LegsWi..


Steel Office Desk

Steel Office DeskMade from real rolled steel joists.Heavy duty rsj sectionFully weldedTopped with 15..


Commercial Kitchen Ventilation Regulations

Careful consideration should be given to the design and type of extraction system that is installed.

Ideally this should be done at the planning stage before anything is fitted and it is often a planning condition that a certain standard of extraction unit is installed. Occasionally businesses will find themselves having to consider what they can do to their existing system if, for example, a complaint is made to the Local Authority and it is found that an odour nuisance is being caused.

The aim of any kitchen ventilation/extraction is to ensure that no nuisance, disturbance or loss of amenity is caused by odour, fumes, food droplets or noise, to nearby properties. Additionally, the visual appearance of the flue may be important and the flue itself may require a separate planning permission. Enquiries should be made to the Local Authority Planning Department regarding this matter.


There are many different types of odour abatement available, not all types are suitable for all cooking methods. In each case, grease filters must be installed.

Activated Charcoal Filters These are installed in the extract duct and filter out most of the cooking smell. They are usually disposable and will last for around 6 months to a year, depending on their use. It is essential that they are of adequate size for the volume and type of odour.

Ozone Systems  These systems are split into two main types.  Ultraviolet lamps, these product ozone by means of specialised lamps.  The ozone can be be used either by mounting the unit inside the ductwork or more efficiently by injecting the ozone into the ventilation system, where it can then mix with the dirty air.

Electrostatic Precipitators - These simply use electrostatic energy to scrub the air clean.  They are very good where there is a lot of smoke and / or grease.

Air Dilution This method involves diluting the fumes with fresh air, with the mixed air being passed through the exhaust at an increased velocity. Whilst the final effluent itself may smell less strong, the amount of odour within it is the same so this method is only likely to be effective where the problem arises from smells trapped in an enclosed area – e.g. if surrounded by higher buildings and air can not escape. Care should be taken to ensure this method does not just move the problem to another location.

Odour Neutralisation This method works by spraying an odour neutralising chemical into the air stream as it passes along the ductwork. If you are considering either installing an extraction system or making alterations to your existing one then you should contact a suitably qualified and experienced person who has specialist knowledge of ventilation schemes for advice.